Typis Circuitus Tabula sunt angularis electronicarum productorum, magni momenti est pro fructibus tuis stabiliter currere vel non diu.Ut fabricator professionalis PCB et PCB Conventus, PCBFuture magni aestimant pro qualitate tabularum circuli.
PCBFuture initium a negotio PCB Fabricationis, deinde ad PCB conventus ac componentium officia proficiscens, nunc unus ex optimis turnkey PCB contionis fabrica factus est.Multum nisus facimus ut in provectis instrumentis melioribus technologiam collocandis, optimized ratio interna melioris efficientiae, ditans laborata ad meliores artes.
| Processus | Item | Processus Capability | |
| Basis Information | Productio Capability | Layer comitem | 1-30 stratis |
| Arcum et torquent | 0.75% vexillum, 0.5% provectus | ||
| Min.complevit PCB magnitudine | 10 x 10mm(0.4 x 0.4") | ||
| Maximilianus.complevit PCB magnitudine | 530 x 1000mm(20.9 x 47.24 ") | ||
| Multi-pressi caecos/sepulti vias | Multi-torcular Cycle≤3 temporibus | ||
| Consummatum tabula crassitudine | 0.3 ~ 7.0mm(8 ~ 276mil) | ||
| Crassitudo perfecta tabula tolerantiae | +/-10% vexillum, +/-0.1mm provectus | ||
| Superficiem metam | HASL, Plumbum liberum HASL, Mico aurum, ENIG, lamina aurea dura, OSP, immersio plumbi, immersio argenti, etc. | ||
| Superficiem metam selectivam | EIG+Aurum digitum, Mico aurum+Aurum digitum | ||
| Materia Type | FR4, Aluminium, CEM, Rogers, PTFE, Nelco, Polyimide/Polyester, etc. | Item potest emere materiae ad petitionem | |
| Aeris ffoyle | 1/3oz ~ 10oz | ||
| Prepreg Type | FR4 Prepreg, LD-1080(HDI) | 106, 1080, 2116, 7628, elc. | |
| Certus Test | Cortices vires | 7.8N/cm | |
| Fammability | 94V-0 | ||
| Ionic contagione | ≤1ug/cm² | ||
| Min.dieelectric crassitudine | 0.093mm(3mil) | ||
| Impedimentum tolerantia | +/-10%, min potest continere +/- 7% | ||
| Interiorem iacuit & tegumen imago serie | Machina Capability | scrubbing Machina | Crassitudo materialis: 0.11 ~ 3.2mm(4.33mil ~ 126mil) |
| Magnitudo materialis: min.228 x 228mm(9 x 9") | |||
| Laminator, Exposer | Crassitudo materialis: 0.11 ~ 6.0mm (4.33 ~ 236mil) | ||
| Materia magnitudo: min 203 x 203mm(8 x 8"), max. | |||
| Etching linea | Crassitudo materialis: 0.11 ~ 6.0mm(4.33mil ~ 236mil) | ||
| Magnitudo materialis: min.177 x 177mm(7 x 7") | |||
| Interiorem iacuit Processus Capability | Min.interiorem lineam latitudinem / spatio | 0.085/0.075mm(3/3mil) | |
| Min.spatio ab ore foraminis ad conductive | 0.2mm(8mil) | ||
| Min.interiorem tabulatum annulum annulum | 0.1mm(4mil) | ||
| Min.interiore iacuit solitudo alvi | 0.25mm(10mil) vexillum, 0.2mm(8mil) | ||
| Min.spatio a tabula ore ad conductive | 0.2mm(8mil) | ||
| Min.intervallum latitudine aeris terram | 0.127mm(5mil) | ||
| Unbalance aeris crassitudine pro core interiore | H/1oz, 1/2oz | ||
| Maximilianus.perfecti aeris crassitudine | 10oz | ||
| Tegumen Processum Capability | Min.externum linea latitudine / eros | 0.085/0.075mm(3/3mil) | |
| Min.foraminis codex magnitudine | 0.3mm(12mil) | ||
| Processus Capability | Maximilianus.socors tento magnitudine | 5 x 3mm (196.8 x 118mil) | |
| Maximilianus.tentorium foraminis magnitudine | 4.5mm (177.2mil) | ||
| Min.latitudo autem tentet terram | 0.2mm(8mil) | ||
| Min.annulus annulus | 0.1mm(4mil) | ||
| Min.picem BGA | 0.5mm(20mil) | ||
| AOI | Machina Capability | Orbotech SK-75 AOI | Crassitudo materialis: 0.05 ~ 6.0mm(2 ~ 236.2mil) |
| Magnitudo materialis: max.597 ~ 597mm(23.5 x 23.5") | |||
| Orbotech Ves Machina | Crassitudo materialis: 0.05 ~ 6.0mm(2 ~ 236.2mil) | ||
| Magnitudo materialis: max.597 ~ 597mm(23.5 x 23.5") | |||
| EXERCITATIO | Machina Capability | MT-CNC2600 Drill machina | Crassitudo materialis: 0.11 ~ 6.0mm (4.33 ~ 236mil) |
| Magnitudo materialis: max.470 ~ 660mm (18.5 x 26") | |||
| Min.magnitudo terebro: 0.2mm(8mil) | |||
| Processus Capability | Min.multi hit terebro frenum magnitudine | 0.55mm(21.6mil) | |
| Maximilianus.aspect ratio (consummavi tabulam magnitudine VS EXERCITATIO amplitudo) | 12:01 | ||
| Foramen locus tolerantiae (comparari cum CAD) | +/-3mil | ||
| counterbore foraminis | PTH&NPTH, Top angulus 130°, Top diameter <6.3mm | ||
| Min.spatio ab ore foraminis ad conductive | 0.2mm(8mil) | ||
| Maximilianus.terebro frenum magnitudine | 6.5mm(256mil) | ||
| Min.multi-hit socors magnitudine | 0.45mm (17.7mil) | ||
| Foramen molem patientiae ad torcular fit | +/-0.05mm(+/-2mil) | ||
| Min.PTH tolerantia socors magnitudine | +/-0.15mm(+/-6mil) | ||
| Min.NPTH socors tolerantia mole | +/-2mm(+/-78.7mil) | ||
| Min.spatio ab ore foraminis ad PROLIXUS (Caecus vias) | 0.23mm(9mil) | ||
| Min.laser terebro magnitudine | 0.1mm(+/-4mil) | ||
| Angulus calculus & Diameter | Top 82,90,120° | ||
| Processus infectum | Machina Capability | Panel & Exemplum plating linea | Crassitudo materialis: 0.2 ~ 7.0mm(8 ~ 276mil) |
| Magnitudo materialis: max.610 x 762mm(24 x 30") | |||
| Deburring Maching | Crassitudo materialis: 0.2 ~ 7.0mm(8 ~ 276mil) | ||
| Magnitudo materialis: min.203 x 203mm(8" x 8") | |||
| Desmear Line | Crassitudo materialis: 0.2mm ~ 7.0mm(8 ~ 276mil) | ||
| Magnitudo materialis: max.610 x 762mm(24 x 30") | |||
| Tin plating linea | Crassitudo materialis: 0.2 ~ 3.2mm(8 ~ 126mil) | ||
| Magnitudo materialis: max.610 x 762mm(24 x 30") | |||
| Processus Capability | Murus aeris crassitudo | Mediocris 25um (1mil) vexillum | |
| Perfecti aeris crassitudine | ≥18um(0.7mil) | ||
| Min linea latitudine ad engraving | 0.2mm(8mil)) | ||
| Max.finished aeris pondus in interioribus & laminis | 7oz | ||
| Alia crassitudine aeris | H/1oz,1/2oz | ||
| Venditor larva & Silkscreen | Machina Capability | scrubbing Machina | Crassitudo materialis: 0.5 ~ 7.0mm(20~ 276mil) |
| Magnitudo materialis: min.228 x 228mm(9 x 9") | |||
| Expositor | Crassitudo materialis: 0.11 ~ 7.0mm(4.3 ~ 276mil) | ||
| Magnitudo materialis: max.635 x 813mm(25 x 32") | |||
| Explicare machina | Crassitudo materialis: 0.11 ~ 7.0mm(4.3 ~ 276mil) | ||
| Magnitudo materialis: min.101 x 127mm(4 x 5") | |||
| Color | Color larva vendidit | Viridis, matte viridis, flavi, nigri, caerulei, rubri, albi | |
| Silkscreen color | Album, flavum, nigrum, caeruleum | ||
| Os vendit facultatem | Min.ferrum persona ostium | 0.05mm(2mil) | |
| Maximilianus.per SUPERGESTUS magnitudine | 0.65mm(25.6mil) | ||
| Min.latitudine lineae coverage per S/M | 0.05mm(2mil) | ||
| Min.width fabulae solidatur larva | 0.2mm(8mil) vexillum, 0.17mm(7mil) | ||
| Min.solidatur persona crassitudine | 10um(0.4mil) | ||
| Crassitudine enim persona per tentationem vendidit | 10um(0.4mil) | ||
| Min.ipsum oleum linea latitudine / eros | 0.25/0.35mm(10/14mil) | ||
| Min.vestigium carbonis | 0.06mm(2.5mil) | ||
| Min.ipsum oleum linea vestigium | 0.3mm(12mil)) | ||
| Min.spatio a ipsum exemplar pads | 0.25mm(10mil) | ||
| Min.latitudine ad pecable persona operimentum linea / codex | 0.15mm(6mil) | ||
| Min.solidari larva pontis latitudinem | 0.1mm(4mil)) | ||
| Persona vendidit duritia | 6H | ||
| Peelable larva Capability | Min.iustae de peeable larva forma ad codex | 0.3mm(12mil)) | |
| Maximilianus.magnitudine pro pecable persona tentorium (per screen printing) | 2mm(7.8mil) | ||
| Maximilianus.magnitudine pro depeculata persona tentorium (per aluminium printing) | 4.5mm | ||
| Peelable persona crassitudine | 0.2 ~ 0.5mm(8 ~20mil) | ||
| Silkscreen Capability | Min.setescreen lineam latitudine | 0.11mm(4.5mil) | |
| Min.setescreen linea altitudinis | 0.58mm(23mil) | ||
| Min.spatio a legend ad codex | 0.17mm(7mil) | ||
| Superficiem Conclusio | Superficiem Conclusio Capability | Maximilianus.auri digiti longitudinem | 50mm(2") |
| ENIG | 3~5um(0.11 ~ 197mil) nickel, 0.025 ~ 0.1um(0.001 ~ 0.004mil) aurum | ||
| digitus aureus | 3~5um(0.11 ~ 197mil) nickel, 0.25 ~ 1.5um(0.01 ~ 0.059mil) aurum | ||
| HASL | 0.4um(0.016mil) Sn/Pb | ||
| HASL Machina | Crassitudo materialis: 0.6 ~ 4.0mm(23.6 ~ 157mil) | ||
| Materia magnitudo: 127 x 127mm ~ 508 x 635mm(5 x 5"~ 20 x 25") | |||
| Durum aurum plating | 1-5u" | ||
| baptisma Tin | 0.8 ~ 1.5um(0.03 ~ 0.059mil) Tin | ||
| immersio Argentea | 0.1 ~ 0.3um(0.004 ~ 0.012mil) Ag | ||
| OSP | 0.2 ~ 0.5um(0.008 ~ 0.02mil) | ||
| E-Test | Machina Capability | Volans specillum testor | Crassitudo materialis: 0.4 ~ 6.0mm (15.7 ~ 236mil) |
| Magnitudo materialis: max.498 x 597mm (19.6 ~ 23.5") | |||
| Min.spatio a test codex ad tabulam in ore gladii | 0.5mm(20mil) | ||
| Min.resistentia | 5Ω | ||
| Maximilianus.Nulla resistentia | 250mΩ | ||
| Maximilianus.test voltage | 500V | ||
| Min.test codex magnitudine | 0.15mm(6mil)) | ||
| Min.test codex ut codex iustae | 0.25mm(10mil) | ||
| Maximilianus.test current | 200mA | ||
| Profiling | Machina Capability | Genus Profiling | NC fuso, V-cut, socors tabs, stamp foramen |
| NC excitandis machina | Crassitudo materialis: 0.05 ~ 7.0mm(2~276mil) | ||
| Magnitudo materialis: max.546 x 648mm(21.5 x 25.5") | |||
| V-cut machina | Crassitudo materialis: 0.6 ~ 3.0mm(23.6 ~ 118mil) | ||
| Max materia latitudinis pro V-cut: 457mm (18") | |||
| Processus Capability | Min.profectus frenum magnitudine | 0.6mm(23.6mil) | |
| Min.forma tolerantia | +/-0.1mm(+/-4mil) | ||
| V genus angulus-Conscidisti | 20°, 30°, 45°, 60° | ||
| V tolerantia angulus-cut | +/-5° | ||
| V adnotatione tolerantia Conscidisti | +/-0.1mm(+/-4mil ) | ||
| Min.auri digito spatio | +/-0.15mm(+/-6mil) | ||
| tolerantia angulus Beelling | +/-5° | ||
| Tolerantia crassitudine manere beelling | +/-0.127mm(+/-5mil) | ||
| Min.interiorem radii | 0.4mm (15.7mil) | ||
| Min.iustae a conductive adumbratim | 0.2mm(8mil) | ||
| Countersink / tolerantiae profundum counterbore | +/-0.1mm(+/-4mil) | ||